BS EN 22248-1993 包装 满装的运输包装 坠落冲击试验
|
ID： |
EF015A720C0748548D6DED120A030186 |
|
文件大小(MB)： |
0.12 |
|
页数： |
12 |
|
文件格式： |
|
|
日期： |
2008-11-9 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,22248:1993,ISO 2248-1985,Incorporating,Amendment No. 1,Complete, filled,transport packages —,Method for,determination of,resistance to vertical,impact by dropping,The European Standard EN 22248:1992 has the status of a,British Standard,UDC 621.798.1:620.165.78,Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS 4826-4:1986,This British Standard, having,been prepared under the,direction of the Packaging and,Freight Containers Standards,Committee, was published,under the authority of the,Board of BSI and comes,into effect on,31 July 1986,. BSI 01-1999,First published August 1972,First revision July 1986,The following BSI references,relate to the work on this,standard:,Committee reference PKM/501,Draft for comment 84/42382 DC,ISBN 0 580 15245 6,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted by the Packaging and,Freight Containers Standards Committee (PKM/-) to Technical Committee,PKM/501, upon which the following bodies were represented:,Association of Drum Manufacturers,British Fibreboard Packaging Association,Chemical Industries Association,Department of Trade and Industry (Laboratory of the Government Chemist),Electronic Components Industry Federation,Glass Manufacturers’ Federation,Institute of Packaging,Ministry of Defence,PIRA (The Research Association for the Paper and Board, Printing and,Packaging Industries),Society of Motor Manufacturers and Traders Limited,Telecommunication Engineering and Manufacturing Association (TEMA),Timber Research and Development Association,Amendments issued since publication,Amd. No. Date of issue Comments,7456 March 1993 Indicated by a sideline in the margin,Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS 4826-4:1986,. BSI 01-1999 i,Content,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,1 Scope and field of application 3,2 References 3,3 Principle 3,4 Apparatus 3,5 Package preparation 3,6 Conditioning 3,7 Procedure 3,8 Test report 4,Annex A 5,Publications referred to Inside back cover,Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS 4826-4:1986,ii . BSI 01-1999,National foreword,This revision of this Part of BS 4826 has been prepared under the direction of the,Packaging and Freight Containers Standards Committee and is identical with,ISO 2248-1985 “Packaging — Complete, filled transport packages — Vertical,impact test by dropping” published by the International Organization for,Standardization (ISO). It supersedes BS 4826-4:1972 which is withdrawn.,In 1992 the European Committee for Standardization (CEN) accepted,ISO 2248-1985 as European Standard EN 22248:1992. As a consequence of,implementing the European Standard this British Standard is renumbered as,BS EN 22248 and any reference to BS 4826-4 should be read as a reference to,BS EN 22248.,Terminology and conventions. The text of the international standard has,been approved as suitable for publication as a British Standard without,deviation. Some terminology and certain conventions are not identical with those,used in British Standards; attention is drawn especially to the following.,The comma has been used as a decimal marker. In British Standards it is current,practice to use a full point on the baseline as the decimal marker.,Wherever the words “International Standard” appear, referring to this standard,they should be read as “British Standard”.,The Technical Committee has reviewed the provisions of ISO 2233, a new edition,of which is currently in preparation and to which reference is made in the text,and has decided that they are acceptable for use in conjunction with this,standard.,A related British Standard is BS 4826 “Complete, filled transport packages”,Part 2:1986 “Method of conditioning for testing”.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Cross-reference,International standard Corresponding British Standard,BS 4826 Methods of test for complete, filled transport,packages,ISO 2206-1972 Part 1:1972 Identification of package parts when testing,(Technically equivalent),Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 6, an inside back cover and a back cover.,This standard has been updated (see copyright da……
……